SKU: N/AThis site contains affiliate links for which we may be compensated
Business & Industrial / Building Materials & Supplies / Commercial Doors & Door Hardware / Commercial Door Hardware
Replacement kit tested/working parts for Header for Stanley
Dura-Storm 3000 Series Left Hand Single Slide Auto
Door (108” W x 96” H). Auto door was installed back in 2019 for about a week
before the frames got damaged. No damages to any parts listed. Equipment was
only Tested before and after install. See photos for unit powered on with equipment. Unit will come unplugged. These are original Stanley direct parts not rebuilt. Don't
be fooled by competitors who may offer "rebuilt equipment." Check the
part number. If the part number starts with the letter "R" then there
is a good possibility it is a rebuilt. Includes: · Stanley Dura-Storm/Duraglide 3000 IQ MC521
Single Controller Box (P/N 1000459-1) with (1) encoder sensor plug-in and (1)
motor plug-in. o Kit comes fully wired with all 10 Position
Terminal Blocks (TB plugs 1-6) shown and labeled with labeled wiring harnesses. o Missing breakout switches and wires (TB3 10/9 slot have cut wires for this to be tied in if needed) o Includes doorway holding safety photobeam transmitter
and receiver with wiring harnesses and plugs. (Not yet wired to controller box
terminal block) o Includes PDA Harness connected to RS232 COM1
connector on MC521. (The MC521 Controller can be tuned-in using a PDA or using
the pushbutton switches located on the controller) · Stanley 514542 Dura-Storm/Duraglide Motor with
Gearbox Assembly (1/4 HP 120 VDC 2-Channel Motor, Gear Drive, Toothed belt)
comes with black encoder and wiring harness and plugs to controller box. Comes
with two (2) bolts and tooth lock washers. No nuts included. · Stanley Dura-Storm/Duraglide Electric Solenoid
Lock Kit Assembly, Left Hand, Fail Secure, Compatible With MC-521 Controller
with wiring harness and terminal block plug. (Excludes the 24 VDC power supply
and power supply wiring) · Two (2) Stanley Brand (New Style) X-Zone -
Dual Technology Combo Motion/Presence Safety Sensor and wiring harnesses and
terminal blocks to controller box for Stanley Dura-Storm/Duraglide. · Two (2) Urethane Top Roller Assemblies for
Stanley Dura-Storm/Duraglide · Two (2) Anit Riser Wheel Assemblies for Stanley
Dura-Storm/Duraglide · ¾” Timing belt and short timing belt bracket
assembly assembled by Stanley rep for Stanley Dura-Storm/Duraglide (108” W x
96” H). No hardware besides what’s shown. · Belt Idler Return Pulley Assembly with hardware
for Stanley Dura-Storm/Duraglide. · Automatic Sliding Door Header Box Cover Soft
Open and Close Damper Shock Kit for Stanley Dura-Storm/Duraglide. No hardware
besides what’s shown. · 6 Position Key Switch with Harness and terminal
block plug to Controller Box for Stanley Dura-Storm/Duraglide. (Missing Key and
surface mount box; replacements can be purchased through Stanley or 3 rd party distributors). · Illuminated Red Power “On” and “Off” Rocker
Switch with 120 VDC Power Wire Harness and Wiring Harness to Control Box for Stanley
Dura-Storm/Duraglide. · Miscellaneous Pivot bushing and bolt (no nut
believe it’s for the stationary panel bottom pivot). Excludes: · Framing system · Glass/Glazing · Manual · 24 VDC Power Supply and wiring is
excluded and can be purchases via 3 rd party if needed · Breakout
Switches and wiring is excluded and can be purchased via 3 rd party
if needed · Any items or hardware not listed or shown in
photos is excluded. · No returns accepted all sales are final so
please ask any questions before placing order.