Features: High Performance & 100% BRAND NEW Direct Replacement Fast Delivery One-year Warranty Specifications: OE/OEM Part Number: E2078S Fuel Type:Gasoline Drive Type:Electrical Pressure:70-95 psi Flow Rate:30-40 gph Package Include: 1 x Fuel Pump Module Assembly Fits these vehicles: Coils-autoparts
Fuel Pump Module Assembly For Ford Ranger 2.3L 2.9L 3.0L 4.0L 1989-1997 SP37A1H Features: High Performance & 100% BRAND NEW Direct Replacement Fast Delivery One-year Warranty Specifications: OE/OEM Part Number:
E2078S Fuel Type:Gasoline Drive Type:Electrical Pressure:70-95 psi Flow Rate:30-40 gph Package Include : 1 x Fuel Pump Module Assembly Fits these vehicles : 1989-1997 Ford Ranger L4-2.3L Sender Assembly 1989-1992 Ford Ranger V6-2.9L Sender Assembly 1991-1997 Ford Ranger V6-3.0L Sender Assembly 1990-1997 Ford Ranger V6-4.0L Sender Assembly 1995-1997 Mazda B2300 L4-2.3L Sender Assembly 1995-1997 Mazda B4000 V6-4.0L Sender Assembly Special Note : Please enter your vehicle's year, make, model, trim and engine in the compatibility table to confirm that the part fits your vehicle. The fuel pump may need to be replaced if: Hard to start up Abnormal noise Low fuel pressure Insufficient driving force and driving with difficulty Vehicles accelerate inefficiently and unstable speed? How to replace:
Park the vehicle on a firm, level surface and set the parking brake. ?
Find the fuel pump, which on most vehicles is in the fuel tank. Once located, open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. The fuel pump will hum for two to three seconds, if working properly. If no sound is made, replacing the pump may be necessary. ?
Relieve the fuel system pressure. Disconnect the negative battery cable. ? Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump. ? Support the fuel tank with a jack and a block of wood. Remove any retaining straps or bolts holding the tank to the frame. Lower the tank. ?
Disconnect the fuel lines and remove the fuel pump from the tank. Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump. ?
Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector. ?
Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair. ?
Item Specifics Drive Type Electrical Fuel Type Gasoline Pressure 70-95 psi Flow Rate 30-40 gph Outlet Size 3/8 in. Placement on Vehicle Fuel Tank Inlet Type Strainer Inlet Count 1 Outlet Count 1 Internal Or External Strainer External Wiring Harness Included No Voltage 12V Gasket or Seal Included Yes Float Included Yes Condition New Package One Fuel Pump Superseded Part Number E9TZ9H307B, E9TZ9H307E, F1TZ9H307D, F57Z9H307E, F57Z9H307EA OE/OEM Part Number E2078S, ZZM13350, ZZM413350, ZZM413350A Fitment Type Direct Replacement Warranty 1 Year Black Pressure Sensor Included No Color White Custom Bundle No OE Spec or Performance/Custom OE Spec Brand coils-autoparts Manufacturer Part Number CL052390S01 Modified Item No Mounting Hardware Included No Fitment 1 For 1989-1997 Ford Ranger L4 2.3L Fitment 2 For 1989-1992 Ford Ranger V6 2.9L Fitment 3 For 1991-1997 Ford Ranger V6 3.0L Fitment 4 For 1990-1997 Ford Ranger V6 4.0L Fitment 5 For 1995-1997 Mazda B2300 L4 2.3L Fitment 6 For 1995-1997 Mazda B4000 V6 4.0L
Payment Paypal, Visa, and MasterCard are the accepted forms of payment.
Please use the eBay checkout system when paying for your order.
Shipping Product will be shipped within 2 business days after full payment is received and verified. Delivery time is about 2-8 business days to most of addresses.
Returns All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Coils-autoparts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Hot Item USD 49.99 USD 70.99 USD 24.60 USD 45.99 USD 39.48
Picture
New List Item USD 78.99 USD 76.99 USD 76.99 USD 201.99 USD 81.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Fuel Pump Module Assembly For Ford Ranger 2.3L 2.9L 3.0L 4.0L 1989-1997 SP37A1H Features: High Performance & 100% BRAND NEW Direct Replacement Fast Delivery One-year Warranty Specifications: OE/OEM Part Number:
E2078S Fuel Type:Gasoline Drive Type:Electrical Pressure:70-95 psi Flow Rate:30-40 gph Package Include : 1 x Fuel Pump Module Assembly Fits these vehicles : 1989-1997 Ford Ranger L4-2.3L Sender Assembly 1989-1992 Ford Ranger V6-2.9L Sender Assembly 1991-1997 Ford Ranger V6-3.0L Sender Assembly 1990-1997 Ford Ranger V6-4.0L Sender Assembly 1995-1997 Mazda B2300 L4-2.3L Sender Assembly 1995-1997 Mazda B4000 V6-4.0L Sender Assembly Special Note : Please enter your vehicle's year, make, model, trim and engine in the compatibility table to confirm that the part fits your vehicle. The fuel pump may need to be replaced if: Hard to start up Abnormal noise Low fuel pressure Insufficient driving force and driving with difficulty Vehicles accelerate inefficiently and unstable speed? How to replace: Park the vehicle on a firm, level surface and set the parking brake. ? Find the fuel pump, which on most vehicles is in the fuel tank. Once located, open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. The fuel pump will hum for two to three seconds, if working properly. If no sound is made, replacing the pump may be necessary. ? Relieve the fuel system pressure. Disconnect the negative battery cable. ? Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump. ? Support the fuel tank with a jack and a block of wood. Remove any retaining straps or bolts holding the tank to the frame. Lower the tank. ? Disconnect the fuel lines and remove the fuel pump from the tank. Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump. ? Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector. ? Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair. ? Item Specifics Drive Type : Electrical Fuel Type : Gasoline Pressure : 70-95 psi Flow Rate : 30-40 gph Outlet Size : 3/8 in. Placement on Vehicle : Fuel Tank Inlet Type : Strainer Inlet Count : 1 Outlet Count : 1 Internal Or External Strainer : External Wiring Harness Included : No Voltage : 12V Gasket or Seal Included : Yes Float Included : Yes Condition : New Package : One Fuel Pump Superseded Part Number : E9TZ9H307B, E9TZ9H307E, F1TZ9H307D, F57Z9H307E, F57Z9H307EA OE/OEM Part Number : E2078S, ZZM13350, ZZM413350, ZZM413350A Fitment Type : Direct Replacement Warranty : 1 Year Black Pressure Sensor Included : No Color : White Custom Bundle : No OE Spec or Performance/Custom : OE Spec Brand : coils-autoparts Manufacturer Part Number : CL052390S01 Modified Item : No Mounting Hardware Included : No Fitment 1 : For 1989-1997 Ford Ranger L4 2.3L Fitment 2 : For 1989-1992 Ford Ranger V6 2.9L Fitment 3 : For 1991-1997 Ford Ranger V6 3.0L Fitment 4 : For 1990-1997 Ford Ranger V6 4.0L Fitment 5 : For 1995-1997 Mazda B2300 L4 2.3L Fitment 6 : For 1995-1997 Mazda B4000 V6 4.0L Payment Shipping Returns Contact Us Paypal, Visa, and MasterCard are the accepted forms of payment.
Please use the eBay checkout system when paying for your order. Product will be shipped within 2 business days after full payment is received and verified. Delivery time is about 2-8 business days to most of addresses. All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by email on working days. All rights reserved.
Returns Accepted for this item if it's within 30 Days