Search Auto Parts:
Or?

Fairlead Products

  • Bullseye Fairlead

    West Marine$2.34
    See it!

    Description : Use the micro bullseye fairlead where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Height: 1 1/16" width: 3/4"

    Find More:
  • Standard Cam Cleats And Accessories Wire Fairlead 1-14 Inchh

    West Marine$7.1
    See it!

    Description : Harken cam matic cleats are legendary for smooth operation when holding and releasing control lines. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Harken model 150 has aluminum jaws, and uses two #10 flat head machine screws.

    Find More:
  • Carbon Fiber C-cleats Accessories Gray Small C-cleat

    West Marine$18.48
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Yellow Small C-cleat

    West Marine$18.48
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Fast Track Fairlead Small

    West Marine$5.13
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Fast Track Fairlead Medium

    West Marine$6.14
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Saddle With Stainless Liner Black

    West Marine$4.59
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Saddle With Stainless Liner Gray

    West Marine$4.29
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Saddle With Stainless Liner Red

    West Marine$4.59
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • Carbon Fiber C-cleats Accessories Heavy-duty Fairlead Gray

    West Marine$7.65
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

    Find More:
  • V-cleats Small Fairlead V-cleat 18 Inch 316 Inch Rope Dia 440lb Swl

    West Marine$4.96
    See it!

    Description : Inline static cleats are tremendously strong and abrasion resistant. Teflon impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Accessory kit for small v cleats includes a range of wedges and mounting plates and a through deck base.

    Find More:
  • V-cleats Medium Fairlead V-cleat 532 Inch 516 Inch Rope Dia 660lb Swl

    West Marine$7.9
    See it!

    Description : Inline static cleats are tremendously strong and abrasion resistant. Teflon impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Accessory kit for small v cleats includes a range of wedges and mounting plates and a through deck base.

    Find More:
  • Lacing Reefing Hooks Deck Fairlead 38 Inch Max Line 1-78 Inch Length

    West Marine$3.52
    See it!

    Description : Choose between low profile, heavy duty, and long styles. Lo pro fits line 3/16" lo pro length: 1 1/2 hd fits line 3/8" hd length: 1 7/8" long fits line 3/16" long length: 3"

    Find More:
  • Lacing Reefing Hooks Snap Fairlead 316 Inch Max Line 3 Inch Length

    West Marine$3.43
    See it!

    Description : Choose between low profile, heavy duty, and long styles. Lo pro fits line 3/16" lo pro length: 1 1/2 hd fits line 3/8" hd length: 1 7/8" long fits line 3/16" long length: 3"

    Find More:
  • Standard Cam Cleats And Accessories X-treme Angle Fairlead 1516 Inchh

    West Marine$13.13
    See it!

    Description : Harken cam matic cleats are legendary for smooth operation when holding and releasing control lines. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Harken model 150 has aluminum jaws, and uses two #10 flat head machine screws.

    Find More:
  • Micro Cam Cleats Accessories Micro Wire Fairlead Kit

    West Marine$5.06
    See it!

    Description : Legendary for smooth, positive operation when holding and releasing control lines, harken ball bearing cam cleats engage and release easily, and work with a wide range of line types and sizes. Delrin ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam matics cam matics feature hardkote anodized aluminum pawls, three rows of ball bearings , and are designed for high load, high wear applications. Carbo cams perfect for racing boats. Lightweight and small, carbo cams feature carbon matrix pawls and two rows of uv protected black ball bearings. Flairleads lightweight fiber reinforced flairleads feature stainless wearguards for long life, and are made in a variety of colors for color coding your controls. X treme angle fairleads allows releasing and recleating at angles up to 90 to the cleat, unlike any other fairlead. Perfect for traveler and cabintop controls or deck cleats a must for laser outhaul and cunningham controls.

  • Micro Cam Cleats Accessories Wedge Kit For Micro Cam 278

    West Marine$3.44
    See it!

    Description : Legendary for smooth, positive operation when holding and releasing control lines, harken ball bearing cam cleats engage and release easily, and work with a wide range of line types and sizes. Delrin ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam matics cam matics feature hardkote anodized aluminum pawls, three rows of ball bearings , and are designed for high load, high wear applications. Carbo cams perfect for racing boats. Lightweight and small, carbo cams feature carbon matrix pawls and two rows of uv protected black ball bearings. Flairleads lightweight fiber reinforced flairleads feature stainless wearguards for long life, and are made in a variety of colors for color coding your controls. X treme angle fairleads allows releasing and recleating at angles up to 90 to the cleat, unlike any other fairlead. Perfect for traveler and cabintop controls or deck cleats a must for laser outhaul and cunningham controls.

  • Micro Cam Cleats Accessories Flat Riser 58 Inch H For Cam-matics

    West Marine$3.44
    See it!

    Description : Legendary for smooth, positive operation when holding and releasing control lines, harken ball bearing cam cleats engage and release easily, and work with a wide range of line types and sizes. Delrin ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam matics cam matics feature hardkote anodized aluminum pawls, three rows of ball bearings , and are designed for high load, high wear applications. Carbo cams perfect for racing boats. Lightweight and small, carbo cams feature carbon matrix pawls and two rows of uv protected black ball bearings. Flairleads lightweight fiber reinforced flairleads feature stainless wearguards for long life, and are made in a variety of colors for color coding your controls. X treme angle fairleads allows releasing and recleating at angles up to 90 to the cleat, unlike any other fairlead. Perfect for traveler and cabintop controls or deck cleats a must for laser outhaul and cunningham controls.

  • Carbon Fiber C-cleats Accessories Rope Guide Medium

    West Marine$5.88
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.

  • Carbon Fiber C-cleats Accessories Rope Guide Small

    West Marine$5.04
    See it!

    Description : Made of lightweight carbon fiber, c cleats are light, strong, simple, long lasting and abrasion resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self lubricating, self cleaning slotted bearings are impregnated with teflon , provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast track fairleads: easily fitted to the cleat, this one piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off center cleating. Made from composite material, this compact, low profile design will not catch lines or clothing. Rope guides: this fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge kits: used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11 , 22 , or 33 tilt. Small c cleats require two 4mm fhms. Hole spacing: 1 1/16". Height: 3/4". Line size: 3/32" 5/16". Swl: 265lb. Medium c cleats require two 5mm fhms. Hole spacing: 1 1/12". Height: 1". Line size: 1/8" 1/2". Swl: 400lb. Large c cleats require two 6mm fhms. Hole spacing: 2". Height: 1 /8". Line size: 1/4" 5/8". Swl: 510lb.